MyShintousuiBottle-Q produces high-concentration hydrogen water at the one press of a button anytime and anywhere.
Water is converted to high-concentration hydrogen water using an original electrolysis method
MyShintousuiBottle-Q separates water into hydrogen and oxygen by electrolysis, and the separated oxygen becomes ozone and gradually remains as bubbles at the bottom of the bottle. The oxygen will be released by incline the bottle. Since the bottles being produced are in a deoxygenated state where hydrogen and oxygen do not combine, the concentration of dissolved hydrogen rises significantly and it declines slowly after production.
1200ppb hydrogen water can be made in just 3 minutes 30 seconds
Until now, many hydrogen water products required 10 to 20 minutes to produce high-concentration hydrogen water, but with MyShintousuiBottol-Q, hydrogen concentration of 1200ppb or more in 250ml of water in just 3 minutes 30 seconds.
- *Measurement conditions: Natural water "Irohas", water temperature 20℃, measured immediately after hydrogen generation
- *Bottle condition: When fully charged and fine bubbles are generated
- *Measurement equipment: Trustlex:dissolved hydrogen meter ENH-1000
High hydrogen dissolved concentration is a key for Hydrogen water
he value of hydrogen concentration we are showing is the concentration of dissolved hydrogen measured in the absence of bubbles after generation. The concentration measured with bubbles is different from the dissolved concentration in hydrogen gas concentration. When measured with a dissolved hydrogen concentration meter during hydrogen water generation, hydrogen gas is detected and a high concentration is displayed, but this is not the correct value. When selecting a hydrogen water generator, check the dissolved hydrogen concentration after generation.
*Concentration varies depending on the water temperature at the time of generation.
About the dissolved hydrogen concentration test reagent.
It cannot be determined accurately with the “Dissolved Hydrogen Concentration Reagent”.
The “Dissolved Hydrogen Concentration Reagent” is not suitable for measuring the dissolved hydrogen concentration of hydrogen water produced by our products because it is affected by oxygen generated when water is electrolyzed.
Use the “Portable Dissolved Hydrogen Meter” to check the dissolved hydrogen concentration.
The decrease in hydrogen concentration is gradual
The hydrogen water made with MyShintousuibottle-Q of hydrogen concentration of 1000ppb retains 500ppb of concentration even after 6 hours.
- *Measurement conditions: Natural water "Irohas", water temperature 20℃, measured immediately after hydrogen generation
- *Bottle condition: When fully charged and fine bubbles are generated
- *Measurement equipment: Trustlex:dissolved hydrogen meter ENH-1000
Reduction Potential of Redox Power
Not only the high hydrogen concentration, but also the reducing power of the redox potential is very high.
What is oxidant redox potential (ORP)?
The difference between the oxidizing force and the reducing force is measured and shown in voltage (mV). If it is positive, it will have a strong oxidizing power to rust, and if it is negative, it means to have a strong reducing power. Hydrogen water produced by MyShintousuiBottle-Q shows a higher value in the negative direction than antioxidant foods, which are generally said to have a low redox potential.
Even though pH does not change, it is negative
The pH of hydrogen water generated by MyShintousuiBottle-Q does not change before and after generation. When generated with pH neutral water then pH neutral hydrogen water is produced.
On the other hand, even with the same electrolysis, alkaline ionized water (electrolytic hydrogen water, reduced hydrogen water) method changes water pH greatly before and after generation.
These indicate that the redox potential is large in the negative direction due to the change in pH.In other words,
he hydrogen water produced by MyShintousuiBottle-Q is completely different from alkaline ionized water, and the original properties of hydrogen are directly reflected in the redox potential.
Heating after generation is not recommended because the redox potential tilts in the positive direction when heated.
- Remark 1: Samples were 3, and 3 measurements for each sample
- Remark 2: The value in the figure is the median
- Remark 3:The red arrow indicates the ORP when room temperature cooling after boiling.
Tap water and hydrogen water before and after heating, as well as beverages
Over 40 times generations per 1-time recharge Simply place on the charging stand! Easy wireless charging
Charging starts automatically just by placing MyShintousuiBotle-Q on a charging stand. You can drink hydrogen water of over 1,200ppb over 40 times with a single charge.
| Model: | AWH003 |
|---|---|
| Capacity: | 250cc |
| Generation time: | 3 minutes and 30 seconds |
| Dissolved hydrogen concentration: | 1200ppb or more |
| Number of generations when fully charged: | 40 times or more |
| Operating temperature range: | 0℃~40℃ |
| Rated voltage: | 7.4V |
| Body weight: | 202g |
| Dimensions: | ⌀60×L182mm |
| Accessories: | Charging stand AC-DC adapter Handy pouch |
| Material: | Bottle-PCTG resin Core unit / Cap-ABS resin |
| Price: | 39,600 yen (tax included) |
- ※Consumable parts are a hydrogen generator and a built-in battery. It is recommended to replace consumable parts in 1.5-2 years after generating hydrogen 4 or 5 times a day.
- ※Regular tap water may damage in durability due to chemical contamination such as chlorine, alkali agents, flocculants, or impurities in the piping. It is recommended to use filtered water or bottled mineral water.
- ※Hydrogen water produced by this product is pH neutral and made to be potable by anyone, but if you are restricted from water intake by doctors such as during illness treatment or pregnancy, then please consult your Doctor.
- Is it good to drink hydrogen water immediately?
- Generally said that dissolved hydrogen concentration will drop quickly, but our device produced hydrogen water concentration only drop around 15% after 3 hours of production. It is said to be effective for the body is more than 300ppb, so you can drink slowly without worrying about time.
- How much hydrogen water should I drink?
- Although it is the number of times of drinking hydrogen water, there is no problem even if you drink a large amount at once, but since active oxygen is constantly generated in our body, a small amount (about 50cc to 100cc) recommended to be taken in many times.Since our hydrogen water gradually decrease in hydrogen concentration, we recommend to drink it in 3 hours little by little.
- Can I only use water?
- Do not use anything other than water as it may cause a decrease in hydrogen production capacity. In addition, it is possible to make cold-brew tea or coffee using hydrogen water after generation.
※Please note that the hydrogen concentration will drop sharply when the hydrogen water is heated. - Can I use tap water?
- It is possible to use tap water.However, tap water contains chemicals such as chlorine, lime, and red rust in water pipes. The amount varies depending on the region and season. If tap water is used as it is, the scale may stick on to electrolysis part or the bottom of the bottle may turn brown. Wash the bottle frequently.
- How much hydrogen concentration is generated?
- Depending on the water temperature, hydrogen water of about 1,200ppb can be generated in 3 minutes and 30 seconds when water temperature at 20°. In addition, the hydrogen concentration is higher with water at room temperature (20°) to body temperature than cold water.
- I use a dissolved hydrogen concentration determination reagent, but the color does not change. Isn't there hydrogen?
- It cannot be determined accurately with the dissolved hydrogen concentration determination reagent.
To accurately check the dissolved hydrogen concentration of MyShintousuiBottole-Q, use the portable dissolved hydrogen meter ENH-1000. - I am concerned about the ozone smell.
- Ozone is inevitably generated by our method, but since it is not dissolved in water, there is no harm to the body. In addition, the odor of ozone will weaken depending on the frequency of use, but if you are still concerned, please try the following.
- Tilt the bottle after hydrogen generation, ozon becomes a big bubble and is discharged into the air. At this time, you can blow or fan with your hands and leave for a few minutes.Then the odor will disappear.
- The lower the water temperature, the stronger the ozone odor. Water with body temperature is recommended because the ozone odor is weak and the hydrogen concentration is high.
- Transfer the hydrogen water to a cup, then ozone odor will be weakened. Even if you transfer the water from bottles to a cup, the hydrogen concentration will not be lower.
- What should I do for regular maintenance?
- After use, please rinse lightly with tap water. Since the core unit is an electrical component, do not wash it with water but clean it with kitchen paper. We recommend regular cleaning with citric acid. For details, please check the instruction manual PDF (2.93MB).
- How to charge?
-
- Plug in the AC adapter.
- Insert the jack into the charging stand.
- Place the bottle on the flat surface of charging stand within circle frame. (Cannot be charged if placed on the black round sponge surface)
- The green LED lights up and charging starts.
- How long does it take to charge?
- It takes about 4 hours when the remaining battery level is low.How long can it be used with fully charged battery?
- How long can it be used with fully charged battery?
- Can be used 40 times or more. However, early charging is recommended.
- Is maintenance necessary?
- The built-in battery and the hydrogen generator are two consumable parts and are recommended for periodic replacement.
The reason for recommending replacement of those parts is, the hydrogen concentration will not be lowed, but platinum nanocolloids are generated from the hydrogen generation part, and this decreases after frequency of use.
This platinum nanocolloid is considered to make the bond between hydrogen and active oxygen more active, and enhance the efficiency of hydrogen water, so we recommend replacing the hydrogen generating part. In addition, the built-in battery has a life span of approximately 500 charge / discharge cycles, so it is replaced at the same time. - How often do you replace consumable parts?
- As a guideline for replacement, if the frequency of hydrogen generation is 4-5 times per day, then 1.5-2 years is an ideal replacement cycle. Since it cannot be judged by appearance, please consult us if you are unsure.
- Can I replace consumable parts by myself? Send back and exchange?
- We also provide regular maintenance, so please send us a complete bottle (including AC adapter and charging stand) to us. We will return it after replacement at our company.
※Correspondence may vary depending on the dealer. Please follow instructions from your dealer. - Can it be used overseas?
- The AC adapter is compatible with AC100-240V. However, since the plug shape differs depending on the country, a conversion socket is required in that case. Please purchase at home electronics stores or in airports.
In addition, please be mind about water quality. - When I press the H2 button, it sounds and stops in a few seconds. Is it a malfunction?
- Are you using distilled water, pure water, or water filtered with a reverse osmosis membrane? These waters may stop because the built-in sensor determines no water.
If it can work with tap water (not passed through a water purifier), it is not a malfunction. If you want to use this water, please add a little additive such as one or two tea leaves.
If you cannot produce with tap water, please contact us. - Water leaks from the joint between the white core unit and the transparent container.
- Water leakage from the joints occurs when the transparent container is not tightened enough. Please tighten it further from the point where it is stop by gasket, there will be no water leakage. If water still leaks, please contact us.